W6 N 2000 Exklusive Manual Download Page 204

Page: 204 / 220

Troubleshooting

Help

204

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Threads jam.

Fabric puckers Rethread the upper and lower threads,

see „Inserting a plastic bobbin in the hook
race“ (Page 62) and „Threading the upper
thread“ (Page 68).

Incorrect needle in use.

Insert a suitable needle.

Incorrect needle/thread/fabric combina-
tion

See „Selecting needles“ > „Needle and
thread table“ (Page 52).

Unsuitable pattern selected.

Adjust the stitch length or stitch width.

Upper thread is not threaded correctly.

Incorrect
thread tension

Rethread the upper thread.

The lower thread or the bobbin is not
inserted correctly.

Insert the bobbin hook race correctly and
pull out the lower thread.

Incorrect needle/thread/fabric combina-
tion

See „Selecting needles“ > „Needle and
thread table“ (Page 52).

The presser foot holder is not attached
correctly.

Attach the pressor foot holder

correctly.

Stitch length is set to “0”.

Fabric is not
transported
correctly

Increase the correct stitch length.

The wrong presser foot is being used for
the selected stitch.

Use the correct presser foot.

Incorrect needle in use.

Insert a suitable needle.

Thread is tangled.

Remove the thread ends from the hook
race.

Needle is not inserted correctly.

Needle breaks Insert the needle correctly.

Needle is worn or too old.

Exchange the needle for a new one.

There are impact points on the metal
needle plate.

Sand the parts with fine emery paper or
replace them.

Incorrect needle/thread/fabric combina-
tion

See „Selecting needles“ > „Needle and
thread table“ (Page 52).

The fabric is pulled too strongly

Guide the fabric without pulling it when
sewing and increase the stitch length.

On and off switch is at “O”.

Machine does
not run.

Switch the machine on.

Power plug not plugged in.

Plug in the power plug.

Troubleshooting

Possible cause

Effect

Solution

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands