W6 N 2000 Exklusive Manual Download Page 45

Page: 45 / 220

Changing the presser foot

Changing the presser foot and the presser foot holder

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Press the small

‹lever›

at the rear to release the

‹presser foot›

from the

‹presser foot holder›

▼

The presser foot is released from the holder automatically when the
lever is pressed.

Place the

‹presser foot holder›

on the centre of the bar of the new

‹presser foot›

Take care that the presser foot bar is aligned with the recess in the

‹presser foot holder›

Lower the presser foot holder by operating the presser foot lifter.

Take care that the presser foot bar engages in the lower position.

The presser foot bar does not engage?

►

Press the small lever at the rear once more.

The presser foot bar still does not engage?

The presser foot bar of the presser foot is not in the correct position.

►

Slide it accordingly, slightly forwards or backwards, to bring it to the
correct position.

Check whether the presser foot has engaged by lifting the presser foot
lifter.

The presser foot has been changed

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands