W6 N 2000 Exklusive Manual Download Page 199

Page: 199 / 220

Maintenance that must be performed by the customer

Maintenance

199

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

13.2.3.4

Removing the needle plate

Carry out the following steps:

Loosen the two screws of the

‹needle plate›

with the round metal screw-

driver, see „Standard accessories“ > „Standard accessories“ (Page 23)
under No. 14 on the table.

Pull out the

‹ needle plate›

towards the right-hand side.

Clean and remove thread or thread remnants from under the

‹needle

plate›

by means of a W6 cleaning brush.

Check the

‹needle plate›

for needle strikes and other damage.

The stitch quality may be affecte

d significantly by having a

damaged needle plate.

The needle plate has been removed

W6 Tip

Minor needle strikes on the needle plate can be removed by means of fine
emery paper (for example, 800-grit).
If the needle plate is severely

damaged by multiple needle strikes, then it

must be replaced. Visit our W6 WERTARBEIT onlinshop in the category

Spare Parts

, to order a new needle plate.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands