W6 N 2000 Exklusive Manual Download Page 172

Page: 172 / 220

Gathering: Program 00

Practical Tips

172

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Cut the two threads with the scissors so that about 5 cm remain.

Knot the two threads together.

Using a needle, pull the ends of the thread into the dart.

Iron the dart to one side.

▼

The dart lies flat.

The dart has been sewn.

12.3 Gathering: Program 00

Standard foot, Super-Stretch Needle 90 or

Gathering is especially suitable for the waistbands of skirts, shirtsleeves
and curtains.

Gathering is sewn by means of the

Straight Stitch Central 001

pattern.

Long stitch lengths and slack thread tension are used when gathering.

Select the following settings:

Settings for gathering

Settings for gathering

Gathering

Pattern program

Stitch length

Stitch width

1 - 7

Presser foot

Standard foot

Thread tension

1 -2

Needle

Super-Stretch 90 or 75

Super-Stretch 90

Super-Stretch 75

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands