W6 N 2000 Exklusive Manual Download Page 201

Page: 201 / 220

Maintenance that must be performed by the customer

Maintenance

201

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

13.2.3.6

Checking the hook race for damage

Carry out the following steps:

Remove the

‹needle plate›

Insert the W6 plastic bobbin in the black

‹hook race›

Pull the lower thread through the two slots on the left-hand side of the
hook race.

Thread the upper thread, see „What do I do with the upper thread?“ >
„Threading the upper thread“ (Page 68).

Also thread the thread through the needle.

Lift the lower thread, see „What do I do with the upper thread?“ > „Taking
up the upper thread with the lower thread“ (Page 75) and pull it out by
about 15 cm.

When doing so, hold the upper thread with the other hand.

Turn the

‹hand wheel›

forwards (towards you

) about five times.

If the thread remains hanging or if it snags, then the hook system is
damaged.

The hook race has been checked for damage

W6 Tip

Minor needle strikes on the hook race may be removed carefully by means
of fine emery paper (for example, 800-grit).
If the hook race has been severely damaged

by needle strikes, it must

be replaced. Visit our W6 WERTARBEIT online shop in the

Spare Parts

category, to order a new hook race.

13.2.4

Machine lighting

The machine is equipped with a maintenance-free LED lamp. Please
contact the W6-WERTARBEIT Customer Service Department in the event

failure.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands