W6 N 2000 Exklusive Manual Download Page 110

Page: 110 / 220

Utility stitches

Using a Pattern

110

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Sew slowly along the edges of the fabric.

Take care that the needle pierces both the folded edges of the fabric

The open seam is sewn

11.3.8

Triple pierced straight stitch: Program 06

Standard foot, Jeans or titanium needle

This stitch is used if strong and durable seams are required, such as

•

seat seams for trousers

•

bottoms of bags

•

trouser and shirt pockets

•

jackets

Prerequisite:

•

You have read the safety notes for this sewing machine, see “Safety
Notes” (page 7).

•

You have set up the machine in a safe place; see “Setting Up” (page 12).

•

You have connected the machine properly, see “Connecting the ma-
chine” (page 12).

•

Please take a look on our website www.w6-wertarbeit.com

and selct the Video "Critical for optimal threading of a

W6 N2000 Exklusive".

•

Use a W6 Super-Stretch Needle 90 (HAx 1SP) for stretch and non-
stretch fabrics, or a W6 Super-Stretch Needle 75 (HAx 1SP) for thinner
fabrics. If necessary, install a special needle.

•

You are using W6 plastic bobbins and thread tension-friendly / lint-free
W6 thread.

•

The presser foot that matches the pattern is installed.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands