W6 N 2000 Exklusive Manual Download Page 166

Page: 166 / 220

Sewing in a zipper: Program 00

Using a Pattern

166

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Press the

‹reverse stitch button›

button to sew reinforcing stitches.

Sew the seam up to the edge of the fabric.

Fold apart the seam allowance.

Tack the zipper.

Take care that the zipper lies in the centre.

Turn the fabric onto the right (top) side.

10.

Sew in the zipper.

11.

Pull the tacking threads.

The zipper has been sewn in.

Legend

No. Designation

Wrong (reverse) side of the fabric

Tack seam

Zipper bottom stop

Reinforcing stitches

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands