W6 N 2000 Exklusive Manual Download Page 191

Page: 191 / 220

Sewing a straight line using a straight stitch on fabric edges.

Practical Tips

191

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Proceed as follows -

2nd Technique

Prerequisite:

•

You have read the safety notes for this sewing machine, see “Safety
Notes” (page 7).

•

You have set up the machine in a safe place; see “Setting Up” (page 12).

•

You have connected the machine properly, see “Connecting the ma-
chine” (page 12).

•

Please take a look on our website www.w6-wertarbeit.com

and selct the Video "Critical for optimal threading of a

W6 N2000 Exklusive".

•

Use a W6 Super-Stretch Needle 90 (HAx 1SP) for stretch and non-
stretch fabrics, or a W6 Super-Stretch Needle 75 (HAx 1SP) for thinner
fabrics. If necessary, install a special needle.

•

You are using W6 plastic bobbins and thread tension-friendly / lint-free
W6 thread.

•

The presser foot that matches the pattern is installed.

Carry out the following steps:

Turn over the edge of the fabric.

Iron and tack the edge of the fabric.

Sew down the edge of the fabric close to the selvedge (for example, the
edges of pillow cases) by using a

straight stitch

Needle position 2 Technique

The needle position is chan

ged once again by turning the dial of the

‹blind hem foot›.

▼

It is now possible to sew a straight and clean second seam

Needle position

No. Designation

Fabric edge

First needle position, e.g. straight stitch

Second needle position. Please change the needle position by
adjusting the stitch width from
7 to 0

2
3

‹blind hem

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands