W6 N 2000 Exklusive Manual Download Page 137

Page: 137 / 220

Buttonholes: Programs 90 to 97

Using a Pattern

137

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

11.9.2

Eyelet buttonhole Programs 92 and 93

Select the following settings:

Eyelet buttonhole settings

W6 Tip

Programs 92 and 93:

The stitch length may be adjusted at any time.

There are certain limitations, the stitch width cannot be changed.

Always place tear-away or self-adhesive W6 stabiliser under the fabric for
the purposes of stabilisation.

11.9.3

Round buttonhole: Programs 94, 95 and 96

Select the following settings:

Round buttonhole settings

W6 Tip

Programs 94, 95 and 96:

The stitch length may be adjusted at any time.

There are certain limitations, the stitch width cannot be changed.

Always place tear-away or self-adhesive W6 stabiliser under the fabric for
the purposes of stabilisation.

Super-Stretch 90

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands