W6 N 2000 Exklusive Manual Download Page 195

Page: 195 / 220

Maintenance that must be performed by the customer

Maintenance

195

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Set the

‹presser foot lifter ›

to the lower position.

Take care that the

‹presser foot lifter›

engages audibly.

Manually tighten the thumb screw of the needle.

Pull the old

‹needle›

downwards out of the holder.

Check the needle for damage and wear.

Exchange the damaged or worn needles.

The needle has been removed

W6 Tip

Worn or damaged needles can break and damage the machine. There is a

risk of injury. Exchange needles regularly.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands