W6 N 2000 Exklusive Manual Download Page 58

Page: 58 / 220

Winding a new W6 plastic bobbin

What do I do with the lower thread?

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Carry out the following steps:

Place a spool of W6 WERTARBEIT thread on the horizontal

‹spool pin›

The thread spool will run more smoothly if you first place a sm

aller

spool on the spool pin.

Fasten the spool by means of the spool cap.

Do not leave a gap between the spool and the spool cap.

Set the speed controller to “slow”.

First guide the thread around the metal thread guide.

Keep the thread taut.

Continue guiding the thread to the mall metal hook of the thread guide to
wind the W6 plastic bobbin and wind it all the way around once.

The thread guide to wind the plastic bobbin is provided with a

notch for the thread. The thread must slip in when winding.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands