W6 N 2000 Exklusive Manual Download Page 167

Page: 167 / 220

General notes | Tension test and thread change

Practical Tips

167

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

12 Practical Tips

As you are already familiar with the machine, the basic steps are no longer

described. However, references are included in the descriptions, to which

you may refer should you feel insecure. In this chapter you will find notes
regarding the most important patterns.

•

Darts: Programs 00 and 01 (Page 169)

•

Gathering: Program 00 (Page 172)

•

Appliqués / Appliqué (Page 175)

•

Sewing corners (Page 177)

•

Sewing at edges (Page 180)

•

Sewing thick fabrics (Page 182)

•

Sewing thin fabrics (Page 184)

•

Sewing stretch fabrics. (Page 186)

•

Sewing a straight line using a straight stitch on fabric edges.
(Page 188)

12.1 General notes | Tension test and thread

change

Before commencing with sewing, take note of the following information,
which is applicable to all sewing work.

12.1.1 Why using W6 thread is important

Cheap, poor quality threads can cause trouble, when sewing. Therefore, we
recommend that you use thread tension-friendly and lint-free W6 WERTAR-
BEIT thread. This thread is suitable for sewing, embroidery and overcasting
machines.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands