W6 N 2000 Exklusive Manual Download Page 42

Page: 42 / 220

Automatic needle threader

Operating elements

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Guide the thread from the left to the right beneath the right-hand guide
hook and keep it taught.

The thread must now be below the hook.

Reduce the pressure on the

‹needle threader lever›

until it moves slowly

upwards. Simultaneously let go of the thread.

The threader jumps back and in doing so, the hook pulls the thread
through the eye of the needle.

Hold the loop and pull the upper thread out towards the back.

The thread is threaded through the eye of the needle

W6 Tip

Moreover, W6 WERTARBEIT offers the following options on its website for
free.

Help / W6 N 2000 Exklusive/ Videos

: Optimal Threading (approxi-

mately 4 minutes’ duration)

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands