W6 N 2000 Exklusive Manual Download Page 177

Page: 177 / 220

Sewing corners

Practical Tips

177

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

foot.

Take care that when the needle plunges to the right, it must pierce
the fabric away from the edge of the appliqué.

►

Position the needle just outside the appliqué when sewing corners
and curves.

►

To do so, lift the

‹presser foot›

slightly and turn the fabric to maintain

the correct needle position.

Sew reinforcing stitches at the end of the seam.

The appliqué has been sewn

W6 Tip

For a seam of perfect appearance, always place W6 self-adhesive stabi-
liser beneath the fabric. If fleece is not used, the seams will appear unequal
and pulled together.

12.5 Sewing corners

Needle position when turning the fabric

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands