W6 N 2000 Exklusive Manual Download Page 193

Page: 193 / 220

Maintenance that must be performed by the customer

Maintenance

193

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

13.2 Maintenance that must be performed by the

customer

Safety instruction: There is a risk of an electrical shock

Before performing any maintenance, switch the machine off with the on and
off switch.
Unplug the power plug.

13.2.1

Checking the needle plate

The stitch quality can deteriorate rapidly, if the lower thread is stuck to the

‹needle plate›

. Remove the

‹needle plate›

at regular intervals, see „Main-

tenance“ > „Removing the needle plate“ (Page 199), and check for needle
strikes.

Minor needle strikes on the

‹needle plate›

can be removed by using fine

800-grit emery paper.

If the

‹needle plate›

is severely damaged by needle strikes, it must be

exchanged. Visit the

Spare Parts

category of our W6 WERTARBEIT

online shop to order a new

‹needle plate›

The following illustration shows an example of a severely damaged

‹needle

plate›

that must be exchanged.

Severely damaged needle plate

13.2.2

Checking a needle / Why using W6 needles is impor-

tant

The

‹hook system›

can be damaged by a defective or blunt needle. Using

a defective needle would ruin the appearance of the seam.

If the needle is damaged too severely, it must be changed, see „Selecting
needles“ > „Inserting a needle“ (Page 50). Visit our W6 WERTARBEIT
online shop in the Spare Parts category, to order a new needle.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands