W6 N 2000 Exklusive Manual Download Page 15

Page: 15 / 220

Unplugging the power plug

Assembling the Machine

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Slowly press the

‹foot controller›

, to start sewing.

The further the

‹foot controller›

is pressed, the faster the machine

sews.
Alternatively, you can also sew without the foot controller. Start and
stop the sewing machine by means of the

‹Start-Stop›

button. Try it,

you’ll be thrilled!

Release the

‹foot controller›

, when you wish to stop sewing.

Set the

‹on and off switch›

to the “

” (OFF), to switch off the machine.

The machine is connected.

2.4

Unplugging the power plug

In the following situations you should switch the machine off at the

‹on and

off switch›

and pull the plug out of the socket:

•

If the machine is going to remain unsupervised.

•

If you exchange the needle or spool.

•

If you remove the covers.

•

If a power failure occurs during use.

•

In the event of a storm.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands