W6 N 2000 Exklusive Manual Download Page 51

Page: 51 / 220

Inserting a needle

Selecting needles

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Press the Needle Up - Needle Down button once

Place a small piece of fabric beneath the presser foot.

This will avoid the possibility of a needle falling into the machine.

Set the

‹presser foot lifter ›

to the lower position.

Take care that the

‹presser foot lifter›

engages audibly.

Loosen the thumb screw of the needle by turning the screw forwards to-
wards the nose.

Do not use a screwdriver or any other tool to loosen the needle
clamp screw.

Pull the old needle downwards out of the holder.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands