W6 N 2000 Exklusive Manual Download Page 34

Page: 34 / 220

Stepless changing of the needle position

Operating elements

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

5.12 Changing the needle position

Pattern width button

If you have selected a straight stitch program, you may use the pattern
width buttons to adjust the needle position steplessly.

Press the right-hand (+) button to move the needle position to the right.
Press the left-hand (-) button to move the needle position to the left.

The following table shows an example.

5.13 Twin needle protection button /

Sewing with the twin needle

Twin needle protection button

Always press the twin needle protection button when sewing with a twin

needle.

W6 Tip

If you have activated the twin needle protection system by pressing the
button and the icon appears in the display, the stitch width is automatically
limited to a value of 5 by the program.

Needle position settings

Stitch

Needle position

Application

Straight stitch

Far left

For patching, straight
stitching close to the edge,
etc.

central

Far right

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands