W6 N 2000 Exklusive Manual Download Page 196

Page: 196 / 220

Maintenance that must be performed by the customer

Maintenance

196

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

13.2.3.2

Removing the presser foot and presser foot lifter

Carry out the following steps:

Push the

‹presser foot lifter ›

upwards

▼

The

‹presser foot lifter›

can also be lifted for various presser feet.

Press the small

‹lever›

at the rear to release the

‹presser foot›

from the

‹presser foot holder›

▼

The presser foot is released from the holder automatically when the
lever is pressed.

Pull the

‹presser foot›

forwards.

Check the

‹presser foot›

for needle strikes and other damage.

By using a damaged presser foot, you may damage your fabric,
because the upper thread and the lower thread are unable to slide
along the fabric evenly. This might result in a sloppy seam or to a
tear in the thread.

Using the screwdriver, loosen the slotted screw of the

‹presser foot

holder›

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands