W6 N 2000 Exklusive Manual Download Page 184

Page: 184 / 220

Sewing thin fabrics

Practical Tips

184

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Slide the fabric beneath the presser foot.

Lower the

‹presser foot›

Continue sewing

If the

‹presser foot›

is not at the same height as the fabric, the machine

might be unable to transport the fabric correctly.

The fabric lies on the left-hand side and the padding on the right

Carry out the following steps:

Place a piece of fabric, paper or cardboard of similar thickness to that of
the fabric under the back of the

‹presser foot›

You may also use the W6 Balance Hub (special accessory) to
compensate for the difference in height.

Lower the

‹presser foot›

Continue sewing

12.8 Sewing thin fabrics

Sewing thin fabrics

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands