e-STUDIO200L/202L/230/232/280/282 FIRMWARE UPDATING
June 2004 © TOSHIBA TEC
6 - 2
6.1
Firmware Updating with Download Jig
(e-STUDIO200L/230/280)
In this equipment, it is feasible to update the firmware automatically by connecting the download jig
using the dedicated connector and turning ON the equipment.
The download jig consists of the ROM, in which the program is written, and the jig board. And three
types of the download jigs are available for each type of the firmware.
For updating the firmware, in addition to the current ways such as updating each firmware individually,
the batch update of the firmware of the equipment is available (except the hard disk and the option).
Refer to the following for the details to update with each download jig.
!
P.6-4 "6.1.1 PWA-DWNLD-350-JIG2 (48 MB)"
!
P.6-11 "6.1.2 PWA-DWNLD-350-JIG1 (16 MB)"
!
P.6-21 "6.1.4 K-PWA-DLM-320"
Firmware
Stored
Download jig
Individual update
Batch update
Master data
Hard disk
PWA-DWNLD-350-JIG2
(48 MB)
—
System ROM
System control PC board
(SYS board)
PWA-DWNLD-350-JIG1
(16 MB)
PWA-DWNLD-350-JIG1
(16 MB)
Engine ROM
Logic PC board
(LGC board)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG1
(16 MB)
Scanner ROM
Scanning section control
PC board
(SLG board)
K-PWA-DLM-320
or
PWA-DWNLD-350-JIG1
(16 MB)
NIC ROM
NIC board
PWA-DWNLD-350-JIG1
(16 MB)
RADF ROM
RADF control PC board
(MR-3016)
K-PWA-DLM-320
—
Finisher ROM
Finisher control PC board
(MJ-1025)
K-PWA-DLM-320
—
FAX ROM
FAX board (GD-1150)
K-PWA-DLM-320
—
05/11
Summary of Contents for e-STUDIO200L
