Toshiba e-STUDIO200L, Service Manual

Page: 109 / 708

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 73
2
472-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(PFP lower
drawer/Thick
paper 1) Long size ALL 20
<0-63>
M When the value
increases by “1”, the
aligning amount
increases by approx.
0.8 mm.
<Paper length>
Long size:
330 mm or longer
Middle size:
220 mm to 329 mm
Short size:
219 mm or shorter
4
472-1 Middle
size ALL 22
<0-63>
M 4
472-2 Short size ALL 19
<0-63>
M 4
473 Paper
feeding
Paper aligning amount
adjustment at the registra-
tion section
(LCF/Thick paper 1) ALL 8
<0-63>
M 1
474-0 Paper
feeding
Paper aligning
amount
adjustment at
the registra-
tion section
(Duplex feed-
ing/Thick
paper 1) Long size ALL 24
<0-63>
M 4
474-1 Middle
size ALL 24
<0-63>
M 4
474-2 Short size ALL 33
<0-63>
M 4
497-0 Laser Adjustment of
drawer side-
ways devia-
tion Upper
drawer ALL 128
<0-255>
M When the value
increases by “1”, the
image shifts toward the
front side by 0.0423 mm. 4
497-1 Lower
drawer ALL 128
<0-255>
M 4
497-2 PFP upper
drawer ALL 128
<0-255>
M 4
497-3 PFP lower
drawer ALL 128
<0-255>
M 4
497-4 LCF ALL 128
<0-255>
M 4
497-5 Bypass
feeding ALL 128
<0-255>
M 4
498-0 Laser Adjustment of
primary scan-
ning laser
writing start
position at
duplex feed-
ing Long size ALL 148
<0-255>
M When the value
increases by “1”, the
image shifts toward the
front side by 0.0423 mm. 4
498-1 Short size
(A4/LT or
smaller) ALL 148
<0-255>
M 4
501 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Center value Photo PPC 128
<0-255>
SYS When the value
increases, the image at
the center step becomes
darker. 1
503 Text/Photo PPC 128
<0-255>
SYS 1
504 Text PPC 128
<0-255>
SYS 1
505 Image Density
adjustment
Fine adjust-
ment of “man-
ual density”/
Light step
value Text/Photo PPC 20
<0-255>
SYS When the value
increases, the image of
the “light” steps becomes
lighter. 1
506 Photo PPC 20
<0-255>
SYS 1
507 Text PPC 20
<0-255>
SYS 1
Adjustment mode (05) <e-STUDIO202L/232/282>
Code
Classi-
fication
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11