Toshiba e-STUDIO200L, Service Manual

Page: 217 / 708

June 2004 © TOSHIBA TEC e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE
2 - 181
2
481 Paper
feeding
Automatic change of paper
source PPC 1
<0-2>
SYS Sets whether or not
changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. “1” is
applied when the
staple/hole-punch is
specified.)
1
482 Paper
feeding
Feeding retry setting ALL 0
<0-1>
M 0: ON
1: OFF 1
483 Laser Pre-running rotation of
polygonal motor ALL 0
<0-2>
SYS Sets whether or not
switching the polygonal
motor from the standby
rotation to the normal
rotation when the origi-
nal is set on the RADF
or the platen cover is
opened.
0: Valid (when using
RADF and the origi-
nal is set manually)
1: Invalid
2: Valid (when using
RADF only)
1
484 Laser Polygonal motor rotational
status switching at the Auto
Clear Mode ALL 0
<0-1>
SYS Sets whether or not
switching the polygonal
motor from the normal
rotation to the standby
rotation at the Auto
Clear Mode.
0: Valid
1: Invalid
1
485 Laser Rotational status of polygo-
nal motor on standby ALL 1
<0-1>
SYS Sets the rotational sta-
tus of polygonal motor
on standby.
0: Rotated (The rota-
tional speed is set at
08-490.)
1: Stopped
1
Setting mode (08) <e-STUDIO202L/232/282>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure
05/11