Toshiba e-STUDIO200L, Service Manual

Page: 144 / 708

e-STUDIO200L/202L/230/232/280/282 ERROR CODE AND SELF-DIAGNOSTIC MODE June 2004 © TOSHIBA TEC
2 - 108
477 General Machine identification
information ALL Refer to
content
<0-1>
M <Default value>
Lower drawer refer-
ence: 0
Upper drawer refer-
ence: 1 2
478 Laser Judged number of polygo-
nal motor rotation error
(Normal rotation) ALL 0
<0-1>
M Displays the error
[CA10] when the set
number of rotation error
has been detected.
0: 2 times 1: 12 times 1
479 Laser Judged number of polygo-
nal motor rotation error
(At acceleration/decelera-
tion) ALL 0
<0-1>
M 0: Waiting time for
polygonal motor
rotation overshoot-
ing 0.6 sec.
1: Waiting time for
polygonal motor
rotation overshoot-
ing 2.2 sec.
1
480 Paper
feeding
Default setting of paper
source PPC 0
<0-5>
SYS 0: A4/LT 1: LCF
2: Upper drawer
3: Lower drawer
4: PFP upper drawer
5: PFP lower drawer
1
481 Paper
feeding
Automatic change of paper
source PPC 1
<0-2>
SYS Sets whether or not
changing the drawer
automatically to the
other drawer with the
paper of the same size
when paper in the
selected drawer has run
out.
0: OFF
1: ON (Changes to the
drawer with the
same paper direc-
tion and size: ex. A4
to A4)
2: ON (Changes to the
drawer with the
same paper size.
Paper with the dif-
ferent direction is
acceptable as long
as the size is the
same: ex., A4 to A4-
R, LT-R to LT. “1” is
applied when the
staple/hole-punch is
specified.)
1
482 Paper
feeding
Feeding retry setting ALL 0
<0-1>
M 0: ON
1: OFF 1
Setting mode (08) <e-STUDIO200L/230/280>
Code
Classifi-
cation
Items
Func-
tion
Default
<Accept-
able
value>
RAM Contents
Proce-
dure