TEXIO LSG-1050H, Instruction Manual

Page: 8 / 205

II
USING THE PRODUCT SAFELY
WARNING
■
Do not remove the product's covers and panels
Never remove the product's covers and panels for any purpose.
Otherwise, the user's electric shock or a fire may be incurred.
■
Warning on using the product
The warning items given below are to avoid danger to the user's body and life
and avoid the damage and deterioration of the product.
Use the product, observing the following warning and caution
items.
■
Warning items on power supply
● Power supply voltage
As the rated power supply voltage of the product, the range from 100 to
240 VAC can be used without being switched.
● Power cord
Important: The attached power cord set can be used for this device
only.
● Protection fuse
If an input protection fuse is blown, the product does not operate. When the
fuse is blown, the user can replace it. However, replace it correctly, observing
the warning and caution items that are provided in the section of the
instruction manual
where the fuse replacement is explained. If the fuse is
incorrectly replaced, a fire may occur.
● Changing the power supply voltage
The rated power supply voltage cannot be changed. Use the
product only at the rated power supply voltage indicated on the
product. Otherwise, a fire may occur. The product's rated power
supply voltage is from 100 to 240 VAC. Use the product in this
range. (For use at a voltage higher than 125 VAC, Please
confirm the voltage ratings of the power cord.)
■
Warning item on grounding
The product has the GND terminal on the panel surface to protect the user
from electric shock and protect the product. Be sure to ground the product to
safely use it.