TEXIO LSG-1050H, Instruction Manual

Page: 111 / 205

101
3-3-3. Data Edit Configuration
Data Edit
Display
Previous
Menu
LOAD RS232
01/Oct/2017
Data Edit for Normal Sequences
RAMP:
LOAD:
OFF
OFF
000 H:
PAUSE:
TRIG OUT
OFF
OFF
0.05ms
0001
Insert
Point
Save
Step: 0001
Time:
Value: 0.000 mA
/
00 M: 00 S
Delete
Point
Active step number
Total number of steps
Delete
All Point
Step settings
Operation
1. Press
FUNC
> Normal Sequence [F2] in order.
2. Select Seq.No. and select the sequence you wish to edit.
Start: S01 ~ S10
3. Press Edit Sequence [F2] to enter the Data Edit
configuration menu.
Note; when there no steps in the current sequence the
“Data Edit for Normal Sequence settings” is blank.
4. Press Insert Point [F1], add a step of the sequence.
Every time Insert Point [F1] is pressed the new Step is
incremented.
The inserted point becomes the current step.
5. Set the following parameters for the currently selected
step. See the Data Edit Overview on page 98 for
configuration details.
Value, Time, LOAD, RAMP, TRIG OUT, PAUSE
6. If you wish to edit a previously inserted step, use the Step
parameter.
Steps can only be selected after they have already been
inserted.
Steps: 0001 ~ 1000
7. The currently selected step can be deleted using the
Delete Point [F2] function.
8. After all the steps for the sequence is complete, press
Save [F3] to save the steps.
Data Edit for Normal Sequence configuration is complete.
Go to Timing Edit for Normal Sequences to edit the sequence.
See page 100 (
3-3-2.Timing Edit Configuration
).
Go to Running a Normal Sequence to run the normal
sequence. Page 102 (
3-3-4. Running a Normal Sequence function
).