TEXIO LSG-1050H, Instruction Manual

Page: 116 / 205

106
FILL Overview The FILL function is used to evenly step up the current or
resistance value settings from a starting step to a
finishing step.
The Fill Function can be used before or after steps are
added to the fast sequence.
Before: Will pre-fill each value within the fill range when
a new step is added.
After: Will post-fill each value within the fill range.
Setting Setting Range Description
Start_Value Sets the current or resistance
value for the starting step.
End_Value Sets the current or resistance
value for the ending step.
Start_Step 0001 ~ 1000 Sets the starting step number.
End_Step 0001 ~ 1000 Sets the ending step number.
Setting example
Step
Setting value
End_Value
Start_Value
Filled
values
Step
01
Step
02
Step
03
Step
04
End_Step Start_Step Filled steps