TEXIO LSG-1050H, Instruction Manual

Page: 62 / 205

52
2-2-4. Slew Rate
Description The current slew rate can be set for CC and CR mode.
The slew rate setting is used to limit the change in current
when switching.
For static mode, only a single slew rate can be set.
Operation 1. Make sure the load is off.
2. Press
Main
.
3. Set the slew rate(s) using the scroll wheel and
number pad.
For static mode, only a single slew rate can be set.
For dynamic mode, set both the rising and falling slew
rates.
Take the timer settings into consideration when
setting the slew rates.
Note: Slew rate setting is not available
for CP and CV mode.
Dynamic mode
Static mode
Time
Value
Slew Rate
Time
Value
Slew Rate
Slew Rate