TEXIO LSG-1050H, Instruction Manual

Page: 113 / 205

103
3-3-5. Fast Sequence function Overview
Description A fast sequence is comprised of a user-defined number of
steps that can be executed at a high frequency. Unlike
normal sequences, each step in a fast sequence has the
same execution time (time base).
This mode is only available for CC and CR mode.
Up to 1000 discrete steps can be configured using fast
sequences.
Each fast sequence can have a memo note attached to
it.
Fast Sequences can be looped up to 9999 discrete
times or for an infinite amount of times.
Fast sequences can be configured to hold a set current
or resistance at the end of the load.
No ramping function can be used with the Fast
Sequence function.
Illustration
Fast Sequence
STEP 01
STEP 02
:
STEP N
Loop:
Description Fast Sequence configuration is split into Timing Edit
configuration and Data Edit configuration.
Timing Edit configuration is used to configure all the
settings that are common to all the steps of the fast
sequence. This includes settings such as the mode,
range, loops and time base.
Data Edit configuration is used to create the actual steps
used in each steps.
See below for a description of each.