TEXIO LSG-1050H, Instruction Manual

Page: 32 / 205

22
1-4-8. Using the Rear Panel Input Terminals
Description The rear panel input terminals accept up to M8-sized
crimped terminals. The rear terminals come with a load
input terminal cover for safety.
Caution
The front panel input terminals on the LSG-H Series are
physically connected to the rear panel terminals.
Steps 1. Turn the power off from the rear panel or put the unit
into standby mode.
2. Turn the power off from the power source.
3. Connect the load wires to the input terminals:
Connect the positive (+) input terminal on the load
generator to the high potential output of the power
source.
Connect the negative (-) input terminal to the low
potential output of the power source.
+ potentinal
- potential