TEXIO LSG-1050H, Instruction Manual

Page: 100 / 205

90
3-2. Program function
The LSG-H Series can create programs that are designed to step-through up
to 16 pre-set load
operations. The program function is a powerful tool that can
allow you to perform a number of different operations in succession.
The execution time of each step is user-defined.
Programs can be chained together to make larger programs.
Up to 16 programs can be created for a program chain.
See page 75 for saving load operations (
2-8.Save / Recall
).
3-2-1. Program function Overview
Description When you run a program, you are essentially executing
up to 16 different load operations consecutively. Each of
the different load operations are “steps” in the program. A
program starts at step 01 and ends at step 16.
A program recalls the operating mode, range,
static/dynamic mode, response speed and other
settings of each step from stored memory. It also
recalls the Go-NoGo settings.
The same memory settings can be used for multiple
steps.
The execution time of each step is configurable.
Applies the Go-NoGo settings for each step.
Each step must be executed in order.
Each step can be configured to automatically go to the
next step or wait for confirmation from the user before
proceeding to the next step.
Individual steps can be skipped.
Programs can be linked together to make program
chains.
Program chains need not be executed in order.
There are 16 steps to a program.
There are up to 16 programs to a chain.