TEXIO LSG-1050H, Instruction Manual

Page: 77 / 205

67
2-5-5. OVP
Description If the OVP is tripped, the LSG-H Series will turn off the
load. The OVP levels can be set from 0V to 10% higher
than the rated voltage.
Operation
Press
Main
> Configure [F5] > Protection [F1] in order,
and set the OVP Level.
OVP Level: OFF, 0~ rated v 5%
Note: To turn OVP off, set the OVP voltage greater than the
current rating v 10%.
Alarm The OVP indicator and a message will only appear on the
LCD display when the input voltage is below the OVP
level.
Pressing the Enter key will clear the message.
The OVP indicator will remain on the display until the
voltage level falls back above the OVP level.
Note: Please use the input voltage to the LSG-H Series in
800V or less.
Display
8.653
V
50.006
mA
0.4327
W
CV B Value 80.000
CV A Value 80.000
LOAD RS232
A Value
Fine
01/Oct/2017
V
V
OVP Alarm
Please Press Enter
To Clear Alarm
OVP
OV
P indicator
Alarm message
when
OV
P is
set to Load Off
Mode
CV
I Range
L87.5mA
V Range
L 80V
Response
Fast
Configure