87
Note
After a function is selected, it is then
“turned on”.
PROG , NSEQ , FSEQ , OCP , OPP or BATT will appear
at the top of the LCD display when the selected function
is on.
When in the Main menu, the PROG, NSEQ,FSEQ or
OCP icon will appear prominently on the LCD display to
remind the operator that a function is still on. The manual
operation cannot be turned on when a Function mode is
turned on.
Be sure to turn the selected function off to return to The
manual operation.
3-1-2. Turning on the Load with the Selected Function
Description
When a function is turned on, the load can be turned on
(with the selected function) by pressing Shift + Load.
Operation
1.
Select the function (PROG, NSEQ, FSEQ, OCP, OPP
or BATT).
2.
Press
Shift
>
Load
On/
Off
in order.
The
Load
On/
Off
key will turn orange when the load is
“on”.
The function icon (PROG , NSEQ , FSEQ, OCP, OPP
or BATT) turns orange when the load is turned on.
3.
Press
Load
On/
Off
.
The load can be turned off.
Display
Mode
CP
IRange
H 35A
VRange
L 15V
Function
Dynamic
Configure
1.500
V
0.000
A
1.50
w
Timer1
0.025
Level2
0.00
Level1
0.00
PROG
RS232
Fine
03/Oct/2018
mS
W
W
LOAD on with the selected function active
Note
The selected function will need to be turned off before a
“manual operation” can be performed.
Summary of Contents for LSG-1050H
