TEXIO LSG-1050H, Instruction Manual

Page: 25 / 205

15
1-4-2. Power Up and Self-Test
Operation 1. Insert the AC power cord into the power socket.
2. Turn the external power switch
on.
(O → —)
3.
If the unit doesn’t turn on, press the On/Standby key
for a second.
The ON/STBY key will go from standby (red) to on
(green).
4. The unit will show the splash screen and then load the
settings from when the unit was last powered down.
5. To turn off the power, press the ON/STBY key again
for a second.
Note
If the LSG-H Series fails to start up properly or does not
turn on, please see your local distributor.
1-4-3. Load Default Settings
Description When first using the LSG-H Series, recall the factory
default settings to ensure the unit is in a known state. See
page 163 (
7-3. LSG-H Series Default Settings
) for a list of the
default settings.
Operation
Press
Shift
>
File
FUNC
in order,
press Media/Default [F1] or Factory Default [F2] to set.
Media
Default
Factory
Default
Save Recall
LOAD RS232
A Value
01/Oct/2017
Load Default Setup
CC
8.75A
800V
Static
Recall The Default Settings!
Pressing F2 Again will
Warning!!!