TEXIO LSG-1050H, Instruction Manual

Page: 115 / 205

105
Data Edit
Overview Each step in a fast sequence contains the following
setting parameters:
Setting Setting Range Description
Step 0001 ~ 1000 Selects and displays the current
step in the sequence.
The number of available steps is
dependent on the number of
steps added using the
Insert
Point [F1] functions.
A minimum of 3 steps.
Value The current or resistance setting
for the selected operating mode.
TRIG OUT ON, OFF When TRIG OUT is set to ON, a
trigger signal is output from the
TRIG OUT BNC terminal at the
start of the step.
See page 145 (
4-1-16-1. Trigger
Signal Output
) for details.
TRIG OUT: ON
Time
Input current
TRIG OUT
Start of step