TEXIO LSG-1050H, Instruction Manual

Page: 156 / 205

146
I MON OUT
BNC
Connector The IMON OUT BNC connector outputs a voltage of 0 ~ 10V
for the High and Low I Ranges and 0 ~ 1V for the Middle I
Range. The common potential is connected to the chassis
ground potential.
J3 Connector The voltage across pins 1 and 3 (or 4) outputs a voltage of 0
-10V for the High and Low I Ranges and 0 - 1V for the Middle
I Range. The common potential is connected to A COM
(negative load terminal).
4-1-16-3. Voltage Monitor Output
Description The voltage output from the VMON OUT terminal and from
the VMON pin on the J3 connector is used to represent the
current input level.
The V Range used to represent the full scale current range
from the VMON OUT terminal and from the VMON pin on the
J3 connector depends on the current range settings.
Monitor Connector V Range Monitor Output Range
V MON OUT (BNC) H, L 0 ~ 8V
V MON (J3) H, L 0 ~ 10V
V MON OUT
BNC
Connector The V MON OUT BNC connector outputs a voltage of 0 - 8V
for the High and Low V Ranges. The common potential is
connected to the chassis ground potential.
J3 Connector The voltage across pins 2 and 3 (or 4) outputs a voltage of 0
-10V for the High and Low V Ranges. The common potential
is connected to A COM (negative load terminal).
0V
Input voltage 0V
8V or 10V
Rated voltage
V MON voltage