TEXIO LSG-1050H, Instruction Manual

Page: 46 / 205

36
2. OPERATION
2-1.
Basic Operation
The LSG-H Series supports 7 main operating modes:
CC, CC+CV, CR, CR+CV, CV, CP, CP+CV
2-1-1. CC Mode
Description In Constant Current Mode the load units will sink the
amount of current programmed.
Regardless of the voltage, the current will stay the same.
For more details on CC mode,
please see the appendix on page 171 (
7-5-1. CC Mode
).
Warning
If you change the mode or the range when the load is
already on, the load will be turned off automatically.
Operation 1. Make sure the load is off.
2. Press
Main
.
3. Select CC mode with the Mode [F1] soft-key.
4. Select the current range with the I Range [F2] soft-
key.
I Range: High, Middle, Low
5. Select the voltage range with the V Range [F3] soft-
key.
V Range: High, Low
6. Set the current level parameters using the scroll
wheel and number pad.
For Static mode, set
CC A Value and /or CC B Value .
For Dynamic mode, set Level1 and Level2 .
The maximum and minimum current levels depend on
the selected ranges.
7. To add CV mode to CC mode (CC+CV),
see page 42 (
2-1-6. +CV Mode
).
8. Set the remaining basic configuration settings such as
the slew rate, and switching function settings.
See page 47 (
2-2. Basic Configuration
) for details.