TEXIO LSG-1050H, Instruction Manual

Page: 35 / 205

25
1-4-10. Using the Terminal Cover (PEL -013)
Description The flexible rear panel terminal cover should be used
when the load wiring becomes too thick to be used with
the PEL-011 terminal cover. This is especially true when
using the load generators in parallel. Like the PEL-013
terminal cover, the PEL-011 is used to prevent electric
shock. The rear panel terminal covers should always be
used when connecting a load to the rear panel terminals.
Caution
Ensure the power is off before making any connections to
the booster pack.
Steps 1. Wrap the insulation sheets around the terminals and
load cables, as shown below. Make sure the terminals
and any exposed wires are covered by the sheets.
Insulation sheet
1
2. Secure the insulation sheets using the supplied velcro
fasteners. 2 fasteners should be used for each sheet.
Fasteners
2