TEXIO LSG-1050H, Instruction Manual

Page: 165 / 205

155
5-1-4. RS-232C/USB Remote Control Function Check
Functionality
check Invoke a terminal application such as PuTTY or
RealTerm. For RS-232C and USB, set the COM port,
baud rate, stop bit, data bit, and parity accordingly.
To check the COM port number and associated port
settings, see the Device Manager in the PC. For
Windows:
Control
panel → System → Hardware tab
Note
If you are not familiar with using a terminal application to
send/receive remote commands from the serial port or via
a USB connection, please page 155
(5-1-5. Using RealTerm
to Establish a Remote Connection
) for more information.
Operation Run this query command via the terminal after the
instrument has been configured for
RS-232C (page 154) / USB (page 152) remote control.
*IDN?
This should return the Manufacturer, Model number,
Serial number, and Firmware version in the following
format.
TEXIO,LSG-H SERIES, XXXXXXXXXXXX, V.X.X.X.X
Manufacturer: TEXIO
Model number : LSG-H SERIES
Serial number : XXXXXXXXXXXX
Firmware version : V.X.X.X
Note
For further details, please see the programming manual,
available on the TEXIO TECHNOLOGY web site
www.texio.co.jp
5-1-5. Using RealTerm to Establish a Remote Connection
Description RealTerm is a terminal program that can be used to
communicate with a device attached to the serial port of a
PC or via an emulated serial port via USB.
The following instructions apply to version 1.99.0.27.
Even though RealTerm is used as an example to
establish a remote connection, any terminal program can
be used that has similar functionality.
Note
RealTerm can be downloaded on Sourceforge.net free of
charge.
For more information please see
http://realterm.sourceforge.net/