TEXIO LSG-1050H, Instruction Manual

Page: 105 / 205

95
3-2-4. Running the Program function
Description Turn the road on, the program function is running.
Operation
1. Press
FUNC
> Program [F1] in order.
2. Turn program mode on by setting Program [F1] to on.
PROG
will appear at the top of the LCD display when
Program is On.
3. Turn the load on.
See page 87 (
3-1-2.Turning on the Load with the Selected
Function
) for the load on.
The
PROG
icon turns orange when the load is turned
on.
4. When a program is running the screen displays which
program, step and memory is currently active.
Press
Pause [F1] to suspend a test, press Continue
[F1] to resume.
Press
Next [F2] to run the next step if its Run setting
was set to Manual .
5. When a program has finished running, a list of the Go-
NoGo results for each step are displayed.
Press
Exit [F5] to exit.
Display:
Program
Running
Continue
PROG RS232
01/Oct/2017
Run Program
0.000
V
0.0000
A
0.00
W
Program No:
Step(Memory)
01(001)
01
GO
Program number that
is currently running.
Go-NoGo result
for the step
Memory number
of current step.
Step that is
currently running.
Display:
Program
Finished
Exit
PROG RS232 01/Oct/2017
Run Program Detail Result
1
1
1
Program
3
2
1
Step
NG
GO
GO
Result