TEXIO LSG-1050H, Instruction Manual

Page: 60 / 205

50
2-2-2. Select the Display Units for Dynamic Mode Levels
Description When Dynamic mode is selected, the Level1 and Level2
values can be set to either discrete values or as a
percentage of a set value.
The setting applies to all applicable operation modes.
By default the units are set to Value.
When Percent is chosen, 100% = 100% of the Set
power, current or resistance value.
Operation 1. Make sure the load is off.
2. Press
Main
> Configure [F5] > Other [F2] in order,
and set the Dyna. Level setting.
Dyna. Level: Value, Percent
Note: Select of
“Dyna. Level” is not available
for CV mode.
Value Setting
Percent Setting
Set
Time
Value
Level
Time
Level1
/ Level2
Value
Level2
/ Level1