Taiden hcs-8300, Installation And Operation Manual

Page: 166 / 255

153
Rear panel of HCS-8300MOA/FSD
Rear panel of HCS-8300MOA
Figure 6.1.2 Rear panel of HCS-8300MO Series 8 Channels Audio Output Device
Figure 6.1.2
：
13. 8x RCA outlet

Unbalanced analog audio outputs.
14. 8x 3-cord phoenix connector

Balanced analog audio outputs.
15. 6P-DIN extension interface indicating light

When connected, LED will blink;

When not connected, LED will turn off.
16. 6P-DIN extension interface (DELEGATE IN)

Connecting to CMU, EMU or Audio Input
Interface.
17. RJ45 extension interface (EXTENSION)

Connecting to CMU, EMU or Audio Input
Interface.
18. Fiber extension interface

Single-mode optical fiber, SC connector;

Connecting to CMU, EMU or Audio Input Interface
for long distance (over tens of kilometers)
transmission.
19. CobraNet port

Connecting to other CobraNet compatible devices
(such as PA, audio recorder, etc.).
20. Dante port

Connecting to other Dante compatible devices.
21. Power input
22. Power switch
23. 2x RS-232 port

The “COM” port is used for connecting to a central
control system for central controlling, as well as for
system diagnosis;

The “TEST” port is used for updating and
monitoring.
24. 4x XLR connector

Connectors for 8 CHs digital (AES/EBU) audio
outputs.
Note:

When the HCS-8300MO is connected to the
CMU, only one of the three interfaces can be
used: either the 6P-DIN extension interface or
the RJ45 extension interface or the fiber
extension interface.