Taiden hcs-8300, Installation And Operation Manual

Page: 131 / 255

118
4.1.4.3 Other configuration
4.1.4.3.1 Output channel configuration
To distribute the interpretation languages separately,
A/B/C channels are provided in the interpreter unit.
When the interpreter unit menu configuration is finished,
the output channel of every interpreter unit must be
setup before the meeting and according to the actual
requirements.

Output channel A is setup at the CMU, and its output
language is a fixed language as the output of the
booth;

Output channel C is used to output a
non-conventional language. Output channel C can
be setup as “None” or “All” from the CMU menu
configuration (refer to section 2.1.4.2 ).

If output channel C is set as “All”, the interpreter
can select the output language by pressing the
output channel C switch and by rotating the
Primary knob at the same time. If the output
channel C is activated, the output of this interpreter
unit will be distributed to all booths which set this
booth as their auto relay booth, and other
interpreters can do relay interpretation. Now, the
output language of the output channel B is a fixed
language as the output of the booth at the CMU
menu configuration (refer to section 2.1.4.2 );

If the output channel C is set as “None”, the output
channel B is used to output a non-conventional
language. Output channel B can be setup as
“None” or “All” from the CMU menu configuration.
If the output channel B is set as “All”, the
interpreter can select the output language by
pressing the output channel B switch and by
rotating the Primary knob at the same time. If the
output channel B is activated, the output of this
interpreter unit will be distributed to all booths
which set this booth as their auto relay booth, and
other interpreters can do relay interpretation.
4.1.4.3.2 Interlock mode
Interpretation mode can be setup by menu operation
on the main unit (refer to section 2.1.4.2 ):

Override: allows an interpreter to override another
interpreter in another interpreter booth supplying
the same interpretation channel.

BC-OVERRIDE: enables B/C channel of an
interpreter in another booth to override an occupied
A channel in another booth, but supplying the same
channel; when an interpreter in another booth to
override an occupied B/C channel in another booth,
the “Microphone ON” indicators the occupied B/C
channel will flash on the control panel for about 5
seconds.

Interlock: blocks another interpreter from using the
same channel in another interpreter booth. As a
warning that another microphone is active on a
given channel, when a second one is activated on
the same channel, the “Microphone ON” indicators
will flash on the control panel for about 5 seconds.
4.1.4.3.3 Playback time configuration
In standby interface, press and hold the Mute key
（
Mute) and rotate the primary knob
⑥
clockwise to go
to the playback time configuration. Rotate the primary
knob
⑥
to set the playback time within a range
between 2 s - 6 s.