Taiden hcs-8300, Installation And Operation Manual

Page: 188 / 255

175
6.4.3 Configuration and operation
When installation and connection are finished, the
Booth Combiner HCS-8300MX/FS should be
configured by the front panel menu operation or the
RoomBoothCombine software prior to the meeting.
The room combination and booth combination
functions are controlled by RoomBoothCombine
software.
A) Starting initialization
B) Initial interface on LCD
The LCD interface displays the room name and work
mode of the current Booth Combiner.

The first row shows the room number and the room
name;

The second row shows current work mode, the
HCS-8300MX/FS Booth Combiner has six work
modes:

Idle Mode: no booth combination and no
room combination;

Master Mode: the mode of master
conference room after room combination;

Slave Mode: the mode of slave conference
room after room combination;

Tenant Mode: the mode of conference
room which borrows booths in booth
combination;

Landlord Mode: the mode of conference
room which lends booths in booth
combination;

Master Mode + Tenant Mode: the mode of
master conference room which borrows
booths in room combination and booth
combination.
Note:

One HCS-8300MX/FS can lend its booths to
only one HCS-8300MX/FS, and not to several
HCS-8300MX/FS at the same time;

One HCS-8300MX/FS cannot borrow as well
as lend booths at the same time.