Taiden hcs-8300, Installation And Operation Manual

Page: 32 / 255

19
2.1 Fully Digital Congress System Main Unit
2.1.1 Functions and instructions
2.1.1.1 Front panel
Figure 2.1.1 Front panel of HCS-8300M CMU
Figure 2.1.1
1. Power light
a. Switches to red in standby mode;
b. Switches to blue when operating.
2. “STANDBY” button
3. “MENU” button
a. The LCD displays the initial user interface:
press this button to enter the LCD set-up
menu;
b. The LCD displays the set-up user interface:
press this button to select the highlighted item
or enter the submenu;
c. The LCD displays the network configuration:
press this button to select/deselect the numeric
value.
4. “

” (Left) button

In standby state, press this button to display
current input audio spectrum;

In the set-up interface of LCD menu, press this
button to cursor to the left.
5. “

” (Right) button

In standby state, press this button to select the
number of maximum active microphones;

In the set-up interface of LCD menu, press this
button to cursor to the right.
6. “EXIT” button

In standby state, press this button to select the
operation mode of the microphones;

In the set-up interface of the LCD menu, press
this button to exit current menu.
7. LINE IN 1 electric level adjustment knob
8. A type USB interface

To plug-in a USB stick.
9. Mini USB interface

For connecting to PC.
10. “MASTER VOLUME”

Knob to adjust the master volume of the floor
audio channel for the congress units.
11. Monitoring earphone interface

Earphone jack (Ø 3.5 mm).
12. Microphone operation mode indicator (“OPEN”
/ “OVERRIDE” / “VOICE” / “APPLY” / “PTT”)

Corresponding indicator lights up according to
selected mode.
13. Menu display

256×32 LCD displays main unit status and
configuration menu.