Taiden hcs-8300, Installation And Operation Manual

Page: 62 / 255

49
2.2.3 Connection
HCS-8300 series CMU has two 6P-DIN output
interfaces; the power capacity of each 6P-DIN interface
is limited. If the actually needed power of the system
(that is, considering the actual total needed power
consumption of the connected congress units and
extension cables) is larger than the output capacity,
HCS-8300ME(/FS) extension main units are needed.
Each extension main unit has an extension input port
for connecting to extension interface of the congress
main unit, another extension output interface
connecting to the next extension main unit. Each
extension main unit has four 6P-DIN output interfaces
for connecting congress units, and dedicated 6 cord
cables are used for connection.
Figure 2.2.4 Connection between the CMU and EMU