Taiden hcs-8300, Installation And Operation Manual

Page: 50 / 255

37
19. Time Setting
Set system clock.
a). Press the “MENU” button to go to “Year”, “Month”,
“Day”, “Hour”, “Minute” in turn;
b). Press the “

/

” button to set time (press and hold
the “

/

” button will adjust numeric value quickly);
c). Press the “MENU” button to save and return to
upper level menu.
20. Chair Object Setting
Assigning the chairman/delegate unit (except
multimedia terminal) with an LCD as the congress host.
When an interpreter presses the “CALL” button on
his/her interpreter unit, he/she sets up intercom with
the assigned congress host.
a). Press the “MENU” button to enter chair object
setting and to assign any chairman/delegate unit
with LCD as the congress host;
b). According to the hint on the LCD of the
chairman/delegate unit, press the “1” button on this
unit, to assign it as the congress host;
c). Press the “MENU” button to save and return to the
upper level menu.
21. Number
Numbering for DCSUnits and Interpreter units.

DCSUnits
a). Enter “DCSUnits”, the LCD on the CMU will display
“Press ‘1’ key of all congress units one by one and
repower”.
At this instant, all contribution units with an LCD will
prompt the number on their LCD; contribution units
without LCD will activate the corresponding LED.
b). Press the “1” button on all contribution units one by
one to number them;
c). When all contribution units are numbered, restart
the CMU to update the number.

Interpreter Units (only for HCS-4385U/50)
a). Enter “Interp’”, all the interpreter units enter
numbering status, and the ‘B’ indicator light was
turned on, the LCD of the main unit is shown as
following:
b). Turn the primary knob to select a number (1-6), and
press the ‘B’ button to confirm;
c). Press the “EXIT” button to stop numbering and
return to up level menu.
22. U-disk Function Setting
Enable/disable USD_D interface (mini USB interface)
on the front panel of the CMU. If enabled, the CMU can
be connected to the PC via the USB_D interface to
backup/restore CMU information.
Note:

To update the number the CMU must be
restarted after the numbering;

HCS-8300 has an auto-numbering function.
“Number" function is used to allocate an ID to
each contribution unit manually. This is used for
some applications which need to know the exact
ID of each contribution unit, for example
controlling the contribution units by the WiFi
touch panel of the central control system.