Taiden hcs-8300, Installation And Operation Manual

Page: 48 / 255

35
12. Mic. Phantom Power Setting
There are two menu items for phantom power setting of
hand-hold microphone interface on multi-functional unit
HCS-4340HDA/50P. This submenu is inaccessible if no
phantom unit is connected.
“Set All Mics” “Single”

Set All Mics
a). Press the “

/

” button to select phantom power
On/Off for condenser microphone;
b). Press the “MENU” button to save and return to
upper level menu;

Single
a). Press the “

/

” button to traverse all connected
HCS-4340A/50P;
b). Press the “MENU” button to select phantom power
On/Off;
c). Press the “EXIT” button to exit after setting.
13. Headphone Monitor Setting
The audio output can be monitored with a headphone
at the monitor jack on the front panel of the CMU.
“Headphone monitor setting” includes two submenus:
“Monitor Channel Select”
“Volume”
a). Press the “

/

” button to select “Monitor Channel
Select” or “Volume”;
b). Press the “MENU” button to go to next step;

Monitor Channel Select
Monitor Channel Select includes: group output 1-6, line
output 1-2.
a). Press the “

/

” button to select monitor channel;
b). Press the “MENU” button to save and return to
upper level menu.

Volume
Adjust monitoring headphone volume, range: -30 dB -
0 dB.
a). Press the “

/

” button to adjust the volume (press
and hold the “

/

” button will adjust numeric value
quickly);
b). Press the “MENU” button to save and return to
upper level menu.
14. Ring Setting
Select ring tone on/off when request to speak, chairman
priority button pressed, timing speak or request to
intercom.
a). Press the “

/

” button to select ring on/off;
b). Press the “MENU” button to save and return to
upper level menu.
15. Priority Setting
Select enable/disable chairman priority button.
a). Press the “

/

” button to select enable/disable
chairman priority button;