Taiden hcs-8300 Installation And Operation Manual Download Page 167

Page: 167 / 255

154

6.1.2 Connection

HCS-8300MO converts the digital audio signals of the

congress system to multi

channel

digital(AES/EBU)/analog audio signals, for further

processing in infrared simultaneous interpretation

systems or recording devices. The audio signal from the

HCS-8300M CMU can be provided to the HCS-5100

digital infrared language distribution system, converted

into an infrared signal and radiated. With digital infrared

receivers, the participators can hear the voice clearly.

The digital audio signal from the HCS-8300M CMU can

be connected directly to the DCS interface of the

HCS-5100MA(F)/N transmitter. But the HCS-5100MC/N

transmitter does not have the DCS interface and the

digital audio signal issued by the HCS-8300M CMU has

first to be converted into an analog signal via the

HCS-8300MO 8 Channels Audio Output Device and

secondly be provided to the HCS-5100MC/N transmitter.

1. HCS-8300MO

can be connected directly to

HCS-8300M CMU in three ways (only one of them can

be used at one time):

♦

Connect the "EXTENSION" interface of the

HCS-8300 CMU to the "EXTENSION IN" interface

of the HCS-8300MO with a Cat. 5 cable.

♦

Connect one outlet (6P-DIN) of the HCS-8300

CMU to the "DELEGATE IN" interface of the

HCS-8300MO with a dedicated 6-pin cable.

♦

Connect the fiber port of the HCS-8300MAU/FS or

HCS-8300MAD/FS/20 to the fiber port of the

HCS-8300MO/FS(D) transmitter.

2. 8 channels unbalanced audio can be outputted from

the 8x RCA outlets. HCS-5100MC/N has 4-channel

/8-channel /16-channel /32-channel (merge mode)

audio input ports (RCA). Connect the audio outputs of

the HCS-8300MO to the INPUT CH0-CH7 of the

HCS-5100MC/N with audio cable. HCS-8300MO can

be cascaded if more than 8 channels are needed.

3. The digital infrared transmitter is connected to the first

radiator by a 75 Ohm coaxial cable. Connect one BNC

plug of the coaxial cable to the “HF OUT” port of the

HCS-5100MC/N and the other BNC plug to the

“MODULATION IN” port of the 1

radiator. When

connecting to the 2

radiator, connect the

“MODULATION OUT” port of the 1

radiator to the

“MODULATION IN” port of the 2

radiator with a

coaxial cable. Up to 30 daisy-chained radiators can be

operated from each socket (6 sockets per transmitter).

Summary of Contents for hcs-8300
































































































































































































































































Search results

Summary of Contents for hcs-8300

Reviews:

Related manuals for hcs-8300

Brands by name

Popular brands

Taiden hcs-8300, Installation And Operation Manual

Search results

Summary of Contents for hcs-8300

Reviews:

Related manuals for hcs-8300

Brands by name

Popular brands