Taiden hcs-8300, Installation And Operation Manual

Page: 105 / 255

92
Push the IC-card into the slot on the right side of the
terminal, if sign-in was successful; the figure is shown
as below. If not, “Invalid IC-card” will be displayed on
the LCD. Please push IC-card again or contact
technical support. While automatically logout once the
card is taken out from the slot.

Automatic Sign-in
In automatic sign-in mode, when operator click the
“Start Sign-in” button or select “Start sign-in
automatically after start conference” on DCS software,
the multimedia signed in automatically.
In above sign-in mode, after sign-in, the main interface
of the multimedia terminal displayed “You have
signed-in”. Shown as the following figure:

PIN code sign-in
In PIN code sign-in status, the LCD will display as the
following figure:
Input PIN code through virtual keyboard to sign in. If
the PIN code is wrong, "Invalid PIN code" will be
displayed on the LCD.

Seat IC-card and PIN code sign-in
In seat IC card and PIN code sign-in status, the LCD
will display as in the following figure:
Either IC card sign-in or PIN code sign-in will work.

Finger Print Sign-in
HCS-8338A and HCS-8348A series new generation
multimedia congress terminal built in fingerprint
identification module, in finger print sign-in status, the
LCD will display as the following figure:
Please press finger on the scanner according the
prompting information. Collecting finger print for every
delegate should be finished before meeting started.
Delegate without finger print data in the database will
not sign in successfully.